U2600-APP

Advantages

Lightweight: 24 oz. (680 grams). Fast installation, approximate rate of 12 per man hour. Installs on any surface from flat to vertical.

Box Dimesions

17'' x 17'' x 5''

Box Weight

Approx. 23 lbs

Equipment Attachment

To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.

Fastener Material Type

304 Stainless Steel

Full Box Quantity

10 units

Full Pallet Quantity

35 boxes

Individual Weight

Approx. 2 lbs

Pallet Dimensions

48'' x 40'' x 47''

Plate Fastener Hole Diameter

17/64" (8 holes)

Plate Fastener Hole Pattern

4-1/8'' Diameter

Plate Material Thickness

0.047'' (1.194mm)

Plate Outer Diameter

5-1/2"

Ratings

Shear: 4000 lbs Tension: 3000 lbs

U-Anchor
Attachment

The U2600-APP is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. Depending on the roofing manufacturer's requirements, 1 or 2 plies of membrane may be required. The membrane is then torched down per the roofing manufacturer's specified methods. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.

Width

11.75''

Video