U3600-SBS TORCH
The U3600-S SBS Torch is a lightweight rooftop attachment system consisting of a U-Anchor 3000-S Series plate and cover membrane. The U3600-S SBS Torch includes The U3600-S SBS Torch provides a positive, watertight, manufacturer accepted attachment for torch applied roofing systems.
Advantages
Lightweight: 24 oz. (680 grams). Fast installation, approximate rate of 12 per man hour. Installs on any surface from flat to vertical.
Box Dimesions
18'' x 13'' x 11''
Box Weight
Approx. 25 lbs
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
Fastener Material Type
304 Stainless Steel
Full Box Quantity
10 Units
Full Pallet Quantity
40 Boxes
Individual Weight
Approx. 2.5 lbs
Pallet Dimensions
48'' x 40'' x 40''
Plate Fastener Hole Diameter
17/64" (12 holes)
Plate Fastener Hole Pattern
0.047'' (1.194mm)
Plate Material Thickness
N/A
Plate Outer Diameter
11.08" x 5.47"
Ratings
Shear: Pending Tension: Pending
U-Anchor Attachment
The U3600-SBS Torch is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. Depending on the roofing manufacturers requirements, 1 or 2 plies of membrane may be required. The membrane is then torched down per the roofing manufacturers specified methods. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.
Width
11.75''
Video
Installation Video
LibraryFAQWarranty