Overview

The AP Solution BLW 0150 Roof Stairs securement for provides the perfect mounting solution for your access system with the help of the U-Anchor™. Every Roof Stairs securement solution is designed with the specifications of your roof, surface, location and other variables in mind. The U-Anchor 2000 and 3000 series attachments provide an unmatched and reliable anchoring system to ensure that your system remains secured, in place and safe. The holding strength of the U-Anchor will keep the system safely mounted to the roof through high wind conditions, seismic events and other conditions that typically cause movement of the Roof Stairs.

Access System Securement Includes:

• U-Anchor 2000 or 3000 Series
• Vertical Strut Bracket
• Handrails
• Kneerails
• Stairs
• Platform

Features:

• Access system securement provides a
  variety of options such as secured stairs,
  crossover bridges, roof walkway and
  many more.
• System is custom built for your project’s
  specific needs.
• All exposed components and hardware
  are made with stainless steel, aluminum,
  or other non-corrosive materials.
• U-Anchors match material and brand of
  your roof.
• Simple and quick install with less
  manpower needed for installation.

Natural environmental events can cause rooftop equipment that is not properly secured to slide, lift and overturn. To prevent this, equipment should be securely attached to the roof surface. The AP Solution™ EBK 0900 Electrical Box Roof Mount offers the perfect solution to avoid accidents and roof leaks during wind or seismic event, keeping your roof free from damage and unnecessary maintenance expenses. The Electrical Box Roof Mount by Anchor Products attaches to your roof without voiding your roof warranty. The 3000 Series U-Anchor Attachment by Anchor Products can withstand over 3,000 pounds of tension force, which provides exceptional strength to hold down electrical boxes on the rooftop and prevent movement that can lead to the roof leaks and damage.

ELECTRICAL BOX - ROOF MOUNTED SYSTEM INCLUDES:

• U-Anchor 3000 Series Attachment
• Vertical Strut Bracket
• Stainless Steel Flanged Nut and Flat Washers

• Features:

  • Attaches safely to EPDM, TPO, PVC,
    asphalt and coated roofs using a
    U-Anchor™ 3000 Series Attachment.
  • U-Anchors match roofing material type
    and brand.
  • The force resistance of each U-Anchor
    can exceed 3,000 lbs in tension and
    4,000 lbs in shear.
  • U-Anchor is accepted by all major North
    American roofing manufacturer, allowing
    warranties to remain in effect.
  • All exposed components are made of
    stainless steel, aluminum, and other
    non-corrosive materials.

     

    Water-tight, seal-less technology, without voiding the roof warranty.

    Downloads

    • Data Sheets -EBK-0900-Electrical Box-Roof Mounted-Data Sheet (PDF)
    • Install Instructions -EBK-0900-Electrical Box-Roof Mounted-Install Instructions (PDF)
    • AP Solutions Brochures

The AP Solution™ EBK 0910 Electrical Disconnect Box Securement System, offers the perfect solution to avoid accidents and roof leaks during wind or seismic event, keeping your roof free from damage and unnecessary maintenance expenses. The Electrical Disconnect Box Securement System by Anchor Products attaches to your roof without voiding your roof warranty. Natural environmental events can cause rooftop equipment that is not properly secured to slide, lift and overturn. To prevent this, equipment should be securely attached to the roof surface. The 3000 Series U-Anchor Attachment by Anchor Products can withstand over 4,000 pounds of tension force, which provides exceptional strength to hold down electrical boxes on the rooftop and prevent movement that can lead to the roof leaks and damage.

System Includes:

• U-Anchor 3000 Series Attachment
• Adjustable Strut Bracket, Flange nut and Washer
• Framing Material (1-5/8 x 1-5/8 channel strut and associated hardware)
• Protective End Caps
• Disconnect box supplied by others
  

  Features:

  • Attaches safely to EPDM, TPO, PVC,
    asphalt and coated roofs using a
    U-Anchor™ 3000 Series Attachment.
  • U-Anchors match roofing material type
    and brand.
  • The force resistance of each U-Anchor
    can exceed 4,000 lbs in tension and
    9,000 lbs in shear.
  • U-Anchor is accepted by all major North
    American roofing manufacturer, allowing
    warranties to remain in effect.
  • All exposed components are made of
    stainless steel, aluminum, and other
    non-corrosive materials.\

Downloads

• Brochures -EBK 0910 – Electrical Disconnect Box – Brochure (PDF)
• Data Sheets -EBK-0910 – Electrical Disconnect Box – Data Sheet (PDF)
• AP Solutions Brochures

Overview

The AP Solution PSS Roof Pipe securement provides the perfect solution to safely secure your plumbing or conduit system to the roof. The Roof Pipe System from Anchor Products gives you a range of versatile options to create the perfect for your pipe support needs. The PSS is secured by U-Anchor 2000 or 3000 Series attachments are easily customized to meet specific project needs. The Roof Pipe Securement System by Anchor Products, is the only pipe support system in the market that is attached with a water-tight anchor that is accepted by all major North American roofing manufacturers and will not void your roof warranty when properly installed.

Roof Pipe Securement System Includes:

• Three sided strut bracket
• Hardware
• 2” Coupling Nut
• All Thread
• U-Anchor 3000 Series or U-Anchor 2000 Series
• Optional :
• Pipe Clamp with Cushion
• Extension Post

Features:

• Advanced system incorporating U-Anchors strength to better secure pipes, preventing pipe movement caused by wind and other forces.
• Can be used with nearly any manufacturers pipe support system to provide proper securement.
• U-Anchors when installed properly will perform as designed for the life of the roof without any harm to the roof material.
• Versatile system can be installed flush with the roof surface or up to 14” in height* and from 8” to 48” wide**, the perfect pipe support and securement system secured by the U-Anchor 3000 or 2000 series attachments. (*For greater than 14” heights see our H-Frame and MEP Frame Systems.**For greater than 48” wide a custom solution using additional supports is available)

The AP Solution PSS 0330 Wall Pipe securement is your solution to safely securing your system to the wall, vertically or horizontally. Wall mounting is a great alternative to a roof mounted pipe system. It allows for more space on the roof, eliminates potential trip hazards and offers options to install one pipe or multiple ones as needed. The Wall Pipe Securement System from Anchor Products provides a wide range of options to create the perfect solution for your pipe support and securement needs. Customize your system further by choosing the specific pipe clamps with sleeves or rollers to meet your design specifications. The Wall Mounted Pipe Securement System by Anchor Products, using the U-Anchor attachment, is the only pipe support system on the market that is mechanically attached with a water-tight anchor.

Wall Pipe Securement System Includes:

• Three Sided Strut bracket
• Stainless Steel Hardware
• U-Anchor 3000 Series 0r 2000 Series
• Optional Accessories: 1-Pipe Clamp 2-Pipe Clamp with Cushion

Features:

• The wall mounted pipe securement system is attached with the U-Anchor 3000 or 2000 Series attachments and is easily customized for all your needs.
• Advanced system incorporating U-Anchors strength to better secure pipes against high winds and seismic events.
• Can be used with any manufacturers pipe support system to provide proper securement.
• U-Anchors when installed properly will perform as designed for the life of the roof without any harm to the roof material.
• System is installed flush to the wall and allows for pipe runs up to 48” in width*.
  (**For greater than 48” wide a custom solution using
  a 3rd support is available)

Overview

The SRS-0220 2-Pipe Snow Fence System by Anchor Products is a complete snow retention system designed to be used with low-slope roofing materials, giving building owners and contractors a reliable, engineered, and tested solution. The Snow Fence System utilizes U-Anchor™ 3000-S Series for superior strength and confidence when it comes to holding back snow on commercial roofing systems. The Snow Fence System is designed to handle extreme loads which allows for fewer attachments and reduced labor. Each system is engineered specifically for your roof, and tested by third party engineers. Additionally, our 2-Pipe Snow Fence System uses pre-flashed and prefabricated components, making installation significantly faster while providing a more consistent performance over field fabricated materials.

2-Pipe Snow Fence System Includes:

• U-Anchor 3000-S Series
• Splice
• 8' x 1" OD Aluminum Pipe
• Snow Bracket
• Pipe Collar
• Flange Nut and Washers
• Restrictor Plate (Optional)
• End Caps

Features:

• Permanent lightweight snow fence with
  superior waterproofing without the need
  for compression seals to exceed the long
  term needs of your project.
• Low-profile of snow bars prevents snow
  creep and typically eliminates the need
  for snow flags / restrictor plates.
• The U-Anchor installs in less than
  5 minutes while the snow fence system
  installs quickly & easily - reducing on-site
  labor expenses.
• The 2-pipe snow fence system is
  manufactured of high tensile aluminum
  and boasts superior loads allowing for
  increased spacing of brackets - reducing
  costs.
• Custom colors available (mill finish is
  the standard)

Overview

The SRS 0100 - Unitized Snow Fence System by Anchor Products is a complete snow retention system designed to be used with low-slope roofing materials, giving building owners and contractors a reliable, engineered, and tested solution. This system utilizes U-Anchor™ 3000-S Series for superior strength and confidence when it comes to holding back snow on commercial roofing systems. Each Unitized Snow Fence System is engineered specifically for your roof, and tested by third party engineers. Additionally, our system uses pre-flashed and prefabricated components, making installation significantly faster while providing a more consistent performance over field fabricated materials. Our System is designed to handle extreme loads which allows for fewer attachments and reduced labor.

System Includes:

• U-Anchor 3000-S Series
• Unitized Bracket
• Flange Nut and Washers

Features:

• Permanent lightweight snow fence with
  superior waterproofing without the need
  for compression seals to exceed the long
  term needs of your project.
• Low-profile of snow bars prevents snow
  creep and typically eliminates the need
  for snow flags / restrictor plates.
• System utilizes U-Anchor 3000-S Series
  Attachments manufactured using
  type and brand specific roofing materials
  to maintain your roof warranty.
• The U-Anchor installs in less than
  5 minutes while the snow fence system
  installs quickly & easily - reducing on-site
  labor expenses.
• The Unitized snow fence system is
  manufactured of high tensile aluminum
  and boasts superior loads allowing for
  increased spacing of brackets - reducing
  costs.
• More options:
  - Custom colors available (mill finish is
  the standard)

Downloads

• Brochures -SRS-0100-Unitized Snow Retention – Brochure (PDF)
• Data Sheets -SRS-0100-Unitized Snow Retention – Data Sheet (PDF)
• AP Solutions Brochures

The AP Solution CAM 0530 Camera Mounting System by Anchor Products ensures that your commercial rooftop camera system is efficiently installed in a safe and stable manner. The security of your commercial building is essential and can be enhanced with a roof or wall mounted camera system. Finding a camera system that provides a stable base, follows current building codes and regulations, and provides maximum visibility options can be difficult unless you utilize our U-Anchor Series supported commercial camera mounting system. The versatility of the U-Anchor Series provides many options for placement and visibility. This is the wall mount option. Each Camera Mount system is designed with your commercial roof material in mind and tested by respected third party engineers. The U-Anchor is accepted by all major North American roofing manufacturers.

Camera Mounting System Includes:

• U-Anchor 3000 Series
• 1-5/8 C-Channel
• Stainless Steel Flanged Nut and Flat Washers

Features:

• U-Anchors match the material and brand of your rooftop
• U-Anchors safely attach to EPDM, TPO, PVC, Asphalt and Coated Roofs without damaging the roof surface
• Compatible with any roof camera system manufacturers base.
• More Options:
  - Generic Material
  - Custom Color

Recent updates in building codes are making the age-old method of using cinder blocks to secure commercial rooftop satellite systems obsolete. AP Solution CMK 0500 Satellite Securement System provides you with a stable and secure option for your system that meets ASCE-7 regulations for your commercial roof. Anchor Products utilizes the U-Anchor 2000 or 3000 Series Attachments to securely attach your satellite system, without voiding your roof warranty. This solution provides a secured base with the help of the U-Anchor. The satellite system stands firm against seismic events and high winds, utilizing the strength provided by the U-Anchor. Our systems are tested and approved by respected third party engineers. The U-Anchor is accepted by all major North American roofing manufacturers.

Satellite Securement System Includes:

• Small Dish:
• 1- Satellite Mounting Bracket
• 2- U-Anchor 3000 Series
• 3- Hardware
• Large Satellites:
• 1- U-Anchor 2000 Series
• 2- Base Frame (not included in system)
• 3- Hardware

Features:

• U-Anchor provides extreme strength for resistance against high winds and seismic events
• Efficient usage of space and versatile placement options
• U-Anchors matches all commercial roofing materials and brands
• U-Anchor Safely attaches to EPDM, TPO, PVC, Asphalt and coated roofs without damaging roof surfaces
• Each U-Anchor 2000 Series attachment can resist approx. 3000 lbs. in tension and 4000 lbs. in shear
• Satellite Bracket Made of 1/8 Galvanized Steel

Overview

The AP Solution ESS 0850 Equipment Screen Securement utilizes our U-Anchor 2000 and 3000 Series Attachments to provide a securely attached equipment screen to your roof. Equipment screens on commercial roofs conceal unsightly rooftop equipment, reduce equipment noise and wind effects on rooftop equipment and roof assemblies. The Equipment Screen Securement solution, secured using the U-Anchor, provides extreme strength and resistant against high winds and seismic events.

Equipment Screen Securement System Includes:

• Each equipment screen solution will be created as a custom design in accordance with your project’s requirements, including U-Anchor 2000 or 3000 Series attachments, aluminum framing and a variety of fence options.

Features:

• Attachments that safely connect to TPO, EPDM, PVC, Asphalt and coated roofs without damaging the roof surface using a U-Anchor
• The U-Anchor can be used with Anchor Products Equipment Screen and Frame or with any manufacturer’s equipment screen
• Quick and easy install that can be done any time of year
• Options for specific and/or unique materials and custom colors available
• Stainless steel hardware and Aluminum framing will not corrode on the roof

Conceal unsightly rooftop equipment with the help of AP Solution™ 0850 Equipment Screen Securement Solution by Anchor Products.

ESS-0850-Equipment Screen-Product Guide

The further we advance in commercial building maintenance and technology; the more rules and regulations tend to change. Recent code changes now require rooftop accessories to be securely attached to the roof and not ballasted. Exterior lighting is crucial to any commercial building, hence it needs to be installed securely to avoid accidents or failures and also to be code complaint. The exterior light mount system uses the U-Anchor 3000 Series Attachments to provide extreme strength. Each commercial rooftop lighting system is developed with your commercial roof in mind. The exterior light mount system uses the U-Anchor 3000-S Series attachments to provide extreme strength. Each commercial rooftop lighting system is developed with your commercial roof in mind.

Round Pipe Wall Light Mount System Includes:

• U-Anchor 3000-S Series
• 1-5/8 C-Channel
• Stainless Steel Flanged Nut and Flat Washers

Features:

• U-Anchors used match roof materials and brand
• U-Anchor safely attaches to EPDM, TPO, PVC, Asphalt and coated roofs without damaging roof surface
• Holding value of each U-Anchor attachment can exceed 3000 lbs. in tension and 4000 lbs. in shear.
• Additional Options :
  - Custom Colors available
  - Roof and Wall Mount options available

The AP Solution™ LMK 0510 Round Pipe Wall Light Mount System provides an easy solution for installation, a secure base, and assurance that your rooftop lighting system is up to building code and specs

LMK-0510-Light Mount-Data Sheet

LMK-0510-Light Mount-Data Sheet

Overview

The AP Solution SMS 0800 Signage securement system is your way to ensure that your commercial rooftop signage is mounted securely, with the help of the U-Anchor 2000 Series attachment. Commercial roof top signage can serve an integral part of your marketing strategy. The difficulty of deciding on design and placement is is stressful enough without having to worry about the roof and the various engineering requirements and regulations that need to be followed as well. Each U-Anchor 2000 Series attachment can resist approx. 3000 lbs. in tension and 4000 lbs. in shear. There’s no sign too big or small for the U-Anchor attachment.

Signage Mounting System Includes:

• U-Anchor 2000 Series
• 1-5/8 C-Channel
• Stainless Steel Flanged Nut and Flat Washers

Features:

• All U-anchors used match roofing material type and brand.
• Corrosion resistant Stainless-steel brackets and hardware
• System Includes 6061 T6 Aluminum Framework
• Customizable solution for your signage needs
• Safely attach your sign to TPO, PVC, EPDM, Asphalt and coated roofs without damaging the roof

The AP Solution WSK 0520 Weather Station Securement System by Anchor Products is your solution to successfully installing and maintaining the stability of your commercial weather station system. Our system uses the U-Anchor™ 2000 Series Attachment to prevent the adverse effects of rain, or any other weather conditions on your system. The U-Anchor allows for the weather station securement system to be efficiently mounted at the standard 4-6 ft. above the surface of your roof. Its versatility can ensure that you can easily find the proper spot to prevent obstruction. Every weather station system is specifically designed for your location and roof. Our system has gone through third party testing by respected engineers and is accepted by all major North-American roofing manufacturers.

Weather Station Securement System Includes:

• U-Anchor 2000 Series
• 1-5/8 C-Channel
• Stainless Steel Flanged Nut and Flat Washers

Features:

• All U-anchors used match roofing material
  type and brand.
• U-Anchor safely attaches to EPDM, TPO,
  PVC, asphalt and coated roofs without
  damaging the roof surface.
• U-Anchor is compatible with any roofing
  weather system manufacturers base and
  mast.
• Easily installed year-round.
• Each U-Anchor 2000 Series Attachment
  can resist approximately 3000 lbs. in tension
  and 4000 lbs in shear.
• More options:
  Wall mounted system available
  Custom colors available

U-Anchors provide exceptional strength and are compatible with any roofing weather system manufacturer’s base and mast.