Solutions for Every Rooftop Equipment Securement Need
Solar
Snow Retention
Mechanical, Electrical & Plumbing
Safety, Access
& Egress
Roof Mounted Box
The AP Solution EBK 0900 Electrical Box securement offers the perfect solution to avoid accidents and roof leaks during wind or seismic event, keeping your roof free from damage and unnecessary maintenance expenses. The Electrical Box Roof Mount by Anchor Products attaches to your roof and is the only warranted solution and is proven to reduce stress on the structure while remaining water-tight.
PRODUCT SPECIFICATIONS
- U-Anchors
• Material Type: Roof Brand Specific or Generic
Membrane
Adjustable Strut Bracket
• Dimensions: 8” x 3” x 3.5”
• Material Type: Hot Dipped Galvanized steel
Platform Surfaces
• Dimensions: As per design requirements
• Material Type: Hot Dipped Galvanized steel
or Aluminum
• Quantity: As Per Specific Requirements
Framing Material
• Dimensions: As per design requirements
• Material Type: Hot Dipped Galvanized steel or Aluminum
• Quantity: As Per Specific RequirementsAttaches safely to EPDM, TPO, PVC,asphalt and coated roofs using a U-Anchor™ 3000 Series Attachment. - U-Anchors match roofing material type and brand.
- The force resistance of each U-Anchor can exceed 3,000 lbs in tension and
4,000 lbs in shear. - U-Anchor is accepted by all major North American roofing manufacturer, allowing warranties to remain in effect.
- All exposed components are made of stainless steel, aluminum, and other
non-corrosive materials.
The AP Solution EBK 0910 Electrical Disconnect Box securement offers the perfect solution to avoid accidents and roof leaks during wind or seismic event, keeping your roof free from damage and unnecessary maintenance expenses. The Electrical Disconnect Box Securement System by Anchor Products attaches to your roof without
voiding your roof warranty.
PRODUCT SPECIFICATIONS
U-Anchors
• Material Type: Roof Brand or Non-Brand
Specific
Adjustable Strut Bracket
• Dimensions: 8” x 3” x 3.5”
• Material Type: Hot Dipped Galvanized steel
Framing Material
• Dimensions: As per design requirements
• Material Type: Hot Dipped Galvanized steel
or Aluminum
• Quantity: As Per Specific Requirement
• Minimum width: 14”
• Typical Height: 36” – 48” (Heights above 48”
may require extra bracing)
Attaches safely to EPDM, TPO, PVC, Asphalt and
coated roofs without damaging the roof using a
U-Anchor™ 3000 Series Attachment.
U-Anchors match roofing material type and brand.
The force resistance of each U-Anchor can exceed
4,000 lbs in tension and 9,000 lbs in shear.
U-Anchor is accepted by all North American roofing
manufacturer allowing warranties to remain in effect.
All exposed components are made of stainless steel,
aluminum, and other non-corrosive materials.
Designed weight capacity of 185lbs. Additional
support may be required for heavier loads
Roof Mounted Box
The AP Solution EBK 0900 Electrical Box securement offers the perfect solution to avoid accidents and roof leaks during wind or seismic event, keeping your roof free from damage and unnecessary maintenance expenses. The Electrical Box Roof Mount by Anchor Products attaches to your roof and is the only warranted solution and is proven to reduce stress on the structure while remaining water-tight.
Features:
- Attaches safely to EPDM, TPO, PVC,
asphalt and coated roofs using a
U-Anchor™ 3000 Series Attachment. - U-Anchors match roofing material type
and brand. - The force resistance of each U-Anchor
can exceed 3,000 lbs in tension and
4,000 lbs in shear. - U-Anchor is accepted by all major North
American roofing manufacturer, allowing
warranties to remain in effect. - All exposed components are made of
stainless steel, aluminum, and other
non-corrosive materials.
The AP Solution EBK 0910 Electrical Disconnect Box securement offers the perfect solution to avoid accidents and roof leaks during wind or seismic event, keeping your roof free from damage and unnecessary maintenance expenses. The Electrical Disconnect Box Securement System by Anchor Products attaches to your roof without
voiding your roof warranty.
PRODUCT SPECIFICATIONS
U-Anchors
• Material Type: Roof Brand or Non-Brand
Specific
Adjustable Strut Bracket
• Dimensions: 8” x 3” x 3.5”
• Material Type: Hot Dipped Galvanized steel
Framing Material
• Dimensions: As per design requirements
• Material Type: Hot Dipped Galvanized steel
or Aluminum
• Quantity: As Per Specific Requirement
• Minimum width: 14”
• Typical Height: 36” – 48” (Heights above 48”
may require extra bracing)
Attaches safely to EPDM, TPO, PVC, Asphalt and
coated roofs without damaging the roof using a
U-Anchor™ 3000 Series Attachment.
U-Anchors match roofing material type and brand.
The force resistance of each U-Anchor can exceed
4,000 lbs in tension and 9,000 lbs in shear.
U-Anchor is accepted by all North American roofing
manufacturer allowing warranties to remain in effect.
All exposed components are made of stainless steel,
aluminum, and other non-corrosive materials.
Designed weight capacity of 185lbs. Additional
support may be required for heavier loads