Solutions for Every Rooftop Equipment Securement Need
Solar
Snow Retention
Mechanical, Electrical & Plumbing
Safety, Access
& Egress
Communications
Rooftop Accessories
H-Frames
Secured H-Frame
The AP Solution MEP 0660 M.E.P. Frame securement is designed and engineered for specific loads and code compliance. The system is secured using the U-Anchor 2000 Series Attachments. Anchor Products offers this securement system in variable sizes to fit your project needs.
The AP Solution™ 0660 M.E.P Frame Securement is a solution engineered to provide a secure attachment for various heavy pipes and conduit, with the help of the U-Anchor 2000 Series Attachments. System can be custom designed according to project specific requirements.
Recommended horizontal support spacing is not to exceed 10 feet centers or as required by the applicable design code or project specifications. Project installer is to ensure each frame is properly elevated to evenly distribute loading at all frame.
Frame Components
• Frame is made with 12 ga slotted strut;
Support legs are 1-5/8”x1-5/8” and header
bar is either 1-5/8” x1-5/8” or 1-5/8”x3-1/4”.
• All parts are made of stainless steel, and/or
Galvanized steel.
• System built to withstand environmental
hazards
Optional Accessories
• Cross Bracing
The AP Solution MEP 0661 Attached M.E.P. Frames securement is designed and engineered to project specific requirements for loads and code compliance. The system is secured using the U-Anchor 2000 Series Attachments. The M.E.P. Attached Frame Securement System can be customized to fit any size for specific project requirements. The AP Solution™ 0661 Attached M.E.P Frame Securement is a solution engineered to provide a secure attachment for various heavy pipes and conduit, with the help of the U-Anchor 2000 Series Attachments. System can be custom designed according to project specific requirements. Recommended horizontal support spacing is not to exceed 10 feet centers or as required by the
applicable design code or project specifications. Project installer is to ensure each frame is properly elevated to evenly distribute loading at all frame.
• Frame is made with 12 GA slotted strut;
Support legs are 1-5/8”x1-5/8” and header
bar is either 1-5/8” x1-5/8” or 1-5/8”x3-1/4”.
• All parts are made of stainless steel, and/or
Galvanized steel.
• System built to withstand environmental
hazards.
Optional Accessories
• Cross Bracing
• Load Management Plate
The AP Solution™ 0661 Attached M.E.P Frame Securement is a solution engineered to provide a secure attachment for various heavy pipes and conduit, with the help of the U-Anchor 2000 Series Attachments. System can be custom designed according to project specific requirements. Recommended horizontal support spacing is not
to exceed 10 feet centers or as required by the applicable design code or project specifications. Project installer is to ensure each frame is properly
elevated to evenly distribute loading at all frame.
Attached H-Frame
The AP Solution HFR 0631 Attached H-Frame securement system provides the strength and secured mounting desired for your commercial roof. The Attached H-Frame System utilizes the U-Anchor 3000™ Series Attachment.
The U-Anchor can resist approximately 3000 lbs. in tension and 4000 lbs. in shear.
Pre-assembled Attached H-Frame
• Dimensions: As per Design
• Material: Hot Dipped Galvanized steel
Adjustable Strut Bracket
• Dimensions: 8” x3” 3-1/2”
• Material: Hot Dipped Galvanized steel
Options:
• Load Management Plate
• Top bar for enclosure
The AP Solution HFR 0631 Attached H-Frame securement system provides the strength and secured mounting
desired for your commercial roof. The Attached H-Frame System utilizes the U-Anchor 3000™ Series Attachment.
The U-Anchor can resist approximately 3000 lbs. in tension and 4000 lbs. in shear.
Optional Enclosed
H-Frame Securement
H-Frame Securement System designed for gravity loading and securement.
U-Anchor provides you with a stable securement that can withstand high winds and other natural hazards.
Attaches safely to TPO, PVC, EPDM, asphalt and coated roofs without damaging the roof with the U-Anchor. All exposed components and hardware are stainless
steel, aluminum, or other non-corrosive materials.
Metal parts consist of stainless steel or Galvanized steel.
Load management plate.
Duct and cable trays are designed for single or multiple
duct supports.
H-Frames
Secured H-Frame
The AP Solution MEP 0660 M.E.P. Frame securement is designed and engineered for specific loads and code compliance. The system is secured using the U-Anchor 2000 Series Attachments. Anchor Products offers this securement system in variable sizes to fit your project needs.
The AP Solution™ 0660 M.E.P Frame Securement is a solution engineered to provide a secure attachment for various heavy pipes and conduit, with the help of the U-Anchor 2000 Series Attachments. System can be custom designed according to project specific requirements.
Recommended horizontal support spacing is not to exceed 10 feet centers or as required by the applicable design code or project specifications. Project installer is to ensure each frame is properly elevated to evenly distribute loading at all frame.
Frame Components
• Frame is made with 12 ga slotted strut;
Support legs are 1-5/8”x1-5/8” and header
bar is either 1-5/8” x1-5/8” or 1-5/8”x3-1/4”.
• All parts are made of stainless steel, and/or
Galvanized steel.
• System built to withstand environmental
hazards
Optional Accessories
• Cross Bracing
The AP Solution MEP 0661 Attached M.E.P. Frames securement is designed and engineered to project specific requirements for loads and code compliance. The system is secured using the U-Anchor 2000 Series Attachments. The M.E.P. Attached Frame Securement System can be customized to fit any size for specific project requirements. The AP Solution™ 0661 Attached M.E.P Frame Securement is a solution engineered to provide a secure attachment for various heavy pipes and conduit, with the help of the U-Anchor 2000 Series Attachments. System can be custom designed according to project specific requirements. Recommended horizontal support spacing is not to exceed 10 feet centers or as required by the
applicable design code or project specifications. Project installer is to ensure each frame is properly elevated to evenly distribute loading at all frame.
Frame Components
• Frame is made with 12 GA slotted strut;
Support legs are 1-5/8”x1-5/8” and header
bar is either 1-5/8” x1-5/8” or 1-5/8”x3-1/4”.
• All parts are made of stainless steel, and/or
Galvanized steel.
• System built to withstand environmental
hazards.
Optional Accessories
• Cross Bracing
• Load Management Plate
The AP Solution™ 0661 Attached M.E.P Frame Securement is a solution engineered to provide a secure attachment for various heavy pipes and conduit, with the help of the U-Anchor 2000 Series Attachments. System can be custom designed according to project specific requirements. Recommended horizontal support spacing is not
to exceed 10 feet centers or as required by the applicable design code or project specifications. Project installer is to ensure each frame is properly
elevated to evenly distribute loading at all frame.
Attached H-Frame
The AP Solution HFR 0631 Attached H-Frame securement system provides the strength and secured mounting desired for your commercial roof. The Attached H-Frame System utilizes the U-Anchor 3000™ Series Attachment.
The U-Anchor can resist approximately 3000 lbs. in tension and 4000 lbs. in shear.
Pre-assembled Attached H-Frame
• Dimensions: As per Design
• Material: Hot Dipped Galvanized steel
Adjustable Strut Bracket
• Dimensions: 8” x3” 3-1/2”
• Material: Hot Dipped Galvanized steel
Options:
• Load Management Plate
• Top bar for enclosure
The AP Solution HFR 0631 Attached H-Frame securement system provides the strength and secured mounting
desired for your commercial roof. The Attached H-Frame System utilizes the U-Anchor 3000™ Series Attachment.
The U-Anchor can resist approximately 3000 lbs. in tension and 4000 lbs. in shear.
Optional Enclosed
H-Frame Securement
H-Frame Securement System designed for gravity
loading and securement.
U-Anchor provides you with a stable securement that
can withstand high winds and other natural hazards.
Attaches safely to TPO, PVC, EPDM, asphalt and coated
roofs without damaging the roof with the U-Anchor
All exposed components and hardware are stainless
steel, aluminum, or other non-corrosive materials.
Metal parts consist of stainless steel or Galvanized steel.
Load management plate.
Duct and cable trays are designed for single or multiple
duct supports.