U2600-SBS TORCH
Category
3000 Series
DESCRIPTION
The U2600-SBS Torch is a lightweight rooftop attachment system consisting of a U-Anchor 2000 Series plate and cover membrane. The U2600-SBS Torch includes a factory prepared SBS cover membrane and separator disk. The U2600-SBS Torch provides a positive, watertight, manufacturer accepted attachment for torch applied roofing systems.
Product information
Resources
General
Advantages
Box Dimensions
Box Weight
Color
Equipment Attachment
Fastener Material Type
Full Box Quantity
Full Pallet Quantity
Individual Weight
Length
Pallet Dimensions
Plate Fastener Hole Diameter
Plate Material Thickness
Plate Outer Diameter?
Ratings
U-Anchor Attachment
Width
Video
Lightweight: 32 oz. (907 grams). Fast installation, approximate rate of 12 per man hour. Installs on any surface from flat to vertical.
18'' x 13'' x 11''
Approx. 21 lbs
Default White*
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
304 Stainless Steel
10 units
40 boxes
Approx. 1.98 lbs
14.75"
48'' x 40'' x 40''
17/64" (12 holes)
0.047" (1.194mm)
8.128" x 5.47"
Shear: 8600 lbs Tension: 4600 lbs
The U3600-S SBS Torch is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. Depending on the roofing manufacturer's requirements, 1 or 2 plies of membrane may be required. The membrane is then torched down per the roofing manufacturer's specified methods. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.
11.75"