U4400-TPO
Category
4000 Series
DESCRIPTION
The U4400-TPO is a lightweight rooftop attachment system consisting of a U-Anchor 4000 Series plate and cover membrane. The cover membrane is factory sealed to the top of the plate. The U4400-TPO provides a positive, watertight, manufacturer accepted attachment for mechanically attached and fully adhered TPO single-ply membranes.
Links
DATA SHEET
-
-
-
- Detail Drawing
-
DRAWINGS
INSTALLATION
CSI GUIDE SPECIFICATIONS
Product information
General
Advantages
Box Dimensions
Box Weight
Color
Equipment Attachment
Fastner Material Type
Full Box Quantity
Full Pallet Quantity
Individual Weight
Length
Pallet Dimensions
Plate Fastener Hole Diameter
Plate Material Thickness
Plate Outer Diameter?
Ratings
U-Anchor Attachment
Width
Video Installation
Extremely strong and lightweight. Rapid installation.
18'' x 13'' x 11''
Approx. 15 lbs
Default White*
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
304 Stainless Steel
4 units
30 boxes
Approx. 3.8 lbs
17.5''
48'' x 40'' x 48''
9.185" (8 holes)
0.118''
14.267"
Shear: 10000 lbs Tension: 10000 lbs
The U4400-TPO is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. The membrane cover is then hot air welded around the perimeter to the roof membrane. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.
17.5''