U3200-Plate
Category
3000 Series
DESCRIPTION
The U-Anchor 3200-Plate is a lightweight rooftop attachment consisting of a U-Anchor 3000 series plate. The U3200-Plate is made to be mechanically attached to the roofing system and flashed in using separate waterproofing method approved by the roofing manufacturer. This is ideal for built-up roofs and pour-able sealant kits.
Links
DATA SHEET
DRAWINGS
- Detail Drawing
CSI GUIDE SPECIFICATIONS
Product information
General
Advantages
Box Dimensions
Box Weight
Equipment Attachment
Fastener
Fastener Hole Diameter
Fastener Material Type
Full Box Quantity
Full Pallet Quantity
Individual Weight
Pallet Dimensions
Plate Dimensions
Plate Fastener Hole Diameter
Plate Material
Plate Outer Diameter
Ratings
U-Anchor Attachment
Video
Lightweight: 4 oz. (113 grams). Installs in less than 5 minutes.
18'' x 13'' x 5''
Approx. 18 lbs
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
3/8″-16 x 1.5″ Bolt - 304 Stainless Steel
17/64″ (12 holes)
304 Stainless Steel
20 units
35 boxes
Approx. 0.8 lbs
48'' x 40'' x 42'
11.08″ x 5.47″
17/64" (12 holes)
0.047'' (1.194mm
11.08" x 5.47"
Shear: 1800 lbs Tension: 1800 lbs
The U3200-Plate is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. The U3200-Plate is then flashed using the manufacturer's recommended method. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.