U2800-COATING
Category
2000 Series
DESCRIPTION
The U2800-Coatings is a lightweight rooftop attachment solution consisting of a U-Anchor 2000 Series plate and a reinforcement fabric. The U2800 includes a factory prepared reinforcement. The reinforcement is dependent on the type of coating being used, and therefore the method of installation may vary.
Links
DATA SHEET
DRAWINGS
- Cross-Sectional / Detail Drawing
- Dimensional Drawing
- Part / Engineering Drawings
INSTALLATION
CSI GUIDE SPECIFICATIONS
Product information
General
Advantages
Box Dimensions
Box Weight
Color
Equipment Attachment
Fastener Material Type
Full Box Quantity
Full Pallet Quantity
Individual Weight
Length
Pallet Dimensions
Plate Fastener Hole Diameter
Plate Fastener Hole Pattern
Plate Outer Diameter?
Ratings
U-Anchor Attachment
Width
Video
Lightweight: 5 oz. (142 grams). Installs quickly, approximately rate of 12 per man hour. Installs on any surface from flat to vertical.
17'' x 17'' x 5''
Approx. 7 lbs
Default White*
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
304 Stainless Steel
10 Units
40 Boxes
Approx. 0.5 lbs
11.75"
48'' x 40'' x 52''
17/64" (8 holes)
0.047'' (1.194mm)
5-1/2"
Shear: 4000 lbs Tension: 3000 lbs
The U2800-Coatings is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. Depending on the roofing manufacturer's requirements, the reinforcement type may vary, thereby changing the method of installation. Consult the coating manufacturer for proper application instructions. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.