U2400-EPDM

2400-EPDM-Elevated-Side

Category

2000 Series

DESCRIPTION

The U2400-EPDM is a lightweight rooftop attachment system consisting of a U-Anchor 2000 Series plate and cover membrane. The cover membrane is factory cut and installed in the field. The U2400-EPDM provides a positive, watertight, manufacturer accepted attachment for mechanically attached and fully adhered EPDM single-ply membranes.

FM ApprovedICC Approved | Anchor | Texas

Links

DATA SHEET
DRAWINGS
    INSTALLATION
    CSI GUIDE SPECIFICATIONS
    Product information
    General

    Advantages
    Box Dimensions
    Box Weight
    Color
    Equipment Attachment
    Fastener Material Type
    Full Box Quantity
    Full Pallet Quantity
    Individual Weight
    Length
    Pallet Dimensions
    Plate Fastener Hole Diameter
    Plate Fastener Hole Pattern
    Plate Material Thickness
    Plate Outer Diameter?
    Ratings
    Sub Category
    U-Anchor Attachment
    Width
    Video
    Extremely strong and lightweight. Fast installation, approximate rate of 12 per man hour. Installs on any surface from flat to vertical.
    17'' x 17'' x 5''
    Approx. 10 lbs
    Default Black*
    To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
    304 Stainless Steel
    10 units
    40 boxes
    Approx. 0.75 lbs
    11.75''
    48'' x 40'' x 52''
    17/64" (8 holes)
    4-1/8'' Diameter
    0.047'' (1.194mm)
    5-1/2"
    Shear: 4000 lbs Tension: 3000 lbs
    U-Anchor
    The U2400-EPDM is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. The membrane cover is then adhered in place and sealed around the perimeter to the cover membrane. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.
    11.75''