U1200 Plate

  1. Home
  2. Products
  3. U-Anchor 1000 Series
  4. U1200 Plate
U1200 Plate

Category

1000 Series

DESCRIPTION

The U-Anchor 1200-Plate is a lightweight rooftop attachment consisting of a U-Anchor 1000 series plate, designed to be mechanically attached and flashed with separate manufacturer approved method. Ideal for built-up roofs and pour-able sealant kits.

Links

DATA SHEET
DRAWINGS
INSTALLATION
CSI GUIDE SPECIFICATIONS
Get A Quote
Product information
General

Advantages
Box Dimensions
Box Weight
Equipment Attachment
Fastener
Fastener GROUPED
Fastener Hole Diameter
Fastner Material Type
Full Box Quantity
Full Pallet Quantity
Individual Weight
Packaging Specs GROUPED
Pallet Dimensions
Plate Diameter
Plate Fastener Hole Diameter
Plate Fastener Hole Pattern
Plate GROUPED
Plate Material Thickness
Plate Outer Diameter?
Ratings
U-Anchor Attachment
Video Installation
Lightweight: 4 oz. (113 grams). Installs in less than 5 minutes
11' x 11" x 6"
Approx. 4 lbs
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
3/8″-16 x 1.5″ Bolt - 304 Stainless Steel
3/8″-16 x 1.5″ Bolt*
0.236″ (4 holes)
304 Stainless Steel
20 units
50 boxes
Approx. 0.1 lbs
GROUPED Individual Weight: Approx. 0.1 lbs. Full Box Quantity: 20 units. Box Weight: Approx. 4 lbs. Box Dimensions: 11″ x 11″ x 6″. Full Pallet Quantity: 50 boxes. Pallet Dimensions: 48″ x 40″ x 38″
48'' x 40'' x 38''
4.75″
0.236" (4 holes)
2.49'' Diameter
Outer Diameter: 4.75″, Fastener Hole Diameter: 0.236″ (4 holes)Fastener Hole Pattern: 2.49″ DiameterMaterial Thickness: 0.039″Material Type: Galvalume® AZ55
0.039''
4.75''
Shear: 1450 lbs Tension: 1050 lbs
The U1200-Plate is attached by fastening through the roofing assembly into the structural decking with 2-4 approved fasteners. The U1200-Plate is then flashed using the manufacturer's recommended method. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing.
U1200 Plate