U2000-PVC
By Quote
The U-Anchor 2000-PVC is a lightweight rooftop attachment system consisting of a thermoplastic target membrane and a U-Anchor 2000 series plate. The plate is factory welded to the target membrane and a matching thermoplastic cover membrane is applied over the plate and onto the target membrane, encapsulating the plate. The U2000-PVC provides a positive, watertight, manufacturer accepted attachment for mechanically attached and fully adhered PVC roofing systems. Additionally, the U2000-PVC acts as an effective expansion joint at each rooftop attachment point and minimizes stress to roof components.
Product Specs
Fastener
- 3/8″-16 x 1.5″ Bolt*
- Material Type: 304 Stainless Steel
Plate
- Outer Diameter: 5-1/2″
- Fastener Hole Diameter: 17/64″ (8 holes)
- Fastener Hole Pattern: 4-1/8″ Diameter
- Material Thickness: 0.047″ (1.194mm)
- Material Type: Galvalume® AZ55
- Target Membrane
- Manufacturer: Brand Specific OR Generic
- Color: Default White*
- Length: 15.75″
- Width: 15.75″
- Thickness: Default 60 mil*
Patents
- Visit www.anchorp.com/patents
Packaging Specs
Sold Individually OR Full Box Quantity
- Individual Weight: Approx. 1.1875 lbs
- Full Box Quantity: 10 units
- Box Weight: Approx. 17 lbs
- Box Dimensions: 17″ x 11″ x 17″
- Full Pallet Quantity: 30 boxes
- Pallet Dimensions: 48″ x 40″ x 67″
Downloads
- Data Sheet – U-Anchor 2000-PVC (PDF)
- Install Guide – U-Anchor 2000 – PVC / TPO / KEE / TPA Roof Membranes (PDF)
- Install Guide – U-Anchor 2000 with Ring – PVC / TPO / KEE / TPA Roof Membranes (PDF)
- Detail Drawing – U-Anchor U2000, Fully Adhered, Single-Ply Flashing (PVC/TPO/KEE/TPA) (PDF)
- Detail Drawing – U-Anchor U2000, Mechanically Attached, Single-Ply Flashing With Ring (PVC/TPO/KEE/TPA) (PDF)
- Product Guide – AP Guide Specification (DOCX)
U-Anchor Attachment
The U2000-PVC is attached to a fully adhered roofing system by hot air welding around the perimeter edge consistent with the specified roofing manufacturer’s hot air welding specifications.
Equipment Attachment
To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved.
Advantages
- Extremely strong and lightweight.
- Fast installation, approximate rate of 12 per man hour.
- Installs on any flat surface.
Ratings
Results are base on plate performance only.
- Ultimate Load – Shear: 1800 lbs
- Ultimate Load – Tension: 1800 lbs
Test was performed in accordance with: ASCE 7-10 ASTM E330-02 (2010) TAS 1178
Testing Approvals
- Accepted – All Major Roofing Manufacturers
Individual deck assembly reports available upon request.
Warranty
- Standard 20 Year Material Only Warranty