Replacement Parts & Accessories

U-Anchors come with all necessary parts aside from fasteners, screws etc. If for any reason a part becomes lost or damaged, you can order replacement parts. We also sell accessories for our products, such as fasteners, screws, stand-off posts, washers, etc. If you need accessories, please order them with your project order. If you are interested in any of the products below or other fastening options, please contact us.

  • HD #14 Drill Point, #3 Philips Truss Head, Black E-Coat for lengths 9″ to 12″
  • EHD #15 Drill Point, #3 Philips Truss Head, Black E-Coat available in 1-1/4″ to 24″ in length
  • Drive Nails available in 1-1/2″ to 12″ in length
  • TL Fasteners available in 2″ to 10″ in length

U-Anchor 2000 EPDM Double Sided Adhesive

$11.00

16 ¼” X 16 ¼” with a 8” center cut out.
Each U-Anchor 2000 EPDM includes the Die Cut Double Sided Adhesive. These are replacements in the event the originals are misplaced

Sold individually. Available in TPO or EPDM.

Product Data Sheet

Membrane Attachment Ring-2

$4.80

For use with U-Anchor 2000 over Mechanically Attached roofs.

Sold individually. Available in TPO, PVC, KEE, & EPDM.

Product Data Sheet

Liquid Flashing Reinforcement Fabric

$8.00

11” O.D. and a 2” I.D.
Each U-Anchor 2600 Coating includes a Liquid Flashing Reenforcement Fabric. These are replacements in the event the originals are misplaced.

Sold individually.

Product Data Sheet

Membrane Separator Disks

$1.25

Membrane Separator Disks provide an approved separation barrier between the roof membrane and rooftop equipment such as L feet and Stand-off Posts 3″ O.D. and a 5/16″ I.D.

Sold individually. Available in TPO, PVC, & KEE.

Product Data Sheet

DP #12 Drill Point, #3 Philips Truss Head, Black E-Coat

from $12.82

Designed for use with 16-22 gauge steel and wood roof decks. Allow 1” penetration into steel decks and wood decks. Available in 1-5/8” – 8” lengths.

Most are sold in packs of 100 or 1000. 7″ and 8″ are sold in packs of 500 only. For information about other lengths, please contact us for a quote.

Product Data Sheet

HD #14 Drill Point, #3 Philips Truss Head, Black E-Coat

from $13.13

Ideal multi-purpose fastener for use with Corrugated steel, structural concrete, and wood. Allow 1” penetration into steel decks and wood decks. Pre-drilling is required for concrete using a 3/16” bit pre-drill hole must be ½” deeper than the fastener to allow for debris in the hole.

Most are sold in packs of 100 or 1000. 7″ and 8″ are sold in packs of 500 only. For information about 9″-12″ lengths, please contact us for a quote.

Product Data Sheet

Stand-off Post

$6.90

Aluminum Stand-Off Post tapped on both ends at 3/8″-16.

Sold individually. Available in heights of 2″, 3″, 4″, 5″, & 6″.

Product Data Sheet

3/8" Stainless Steel Nut

$12.00

Sold in packages of 50.

3/8" Stainless Steel Lock Washer

$8.00

Sold in packages of 50.

1/2" x 2" Stainless Steel Flat Washer

$8.60

Sold in packages of 10.

Contact Us

© 2015- Anchor Products. All Rights Reserved.
Designed by Colorado Springs SEO

Anchor Products

P.O. Box 1551
Colleyville, TX 76034
United States

T  888-575-2131
E info@anchorp.com
E orders@anchorp.com