U-Anchor 2000 Single Ply

The U-Anchor 2000 is a integrated solution for all full adhered single ply membrane applications, consisting of an encapsulated U-Anchor plate with a 3/8”-16 S.S. fused to a 16”X16” membrane target. The target is welded to a fully adhered roof membrane. The Target can be made from the same brand as the roofing material. Available with and without a membrane attachment ring.

Please specify a brand when possible. Nuts and lock washers sold separately. Alternate colors other than white are available, please contact us.

Uanchor2000-3.jpg

$42.50 (EPDM $53.50)          With Ring $47.50 (EPDM $58.30)

Available in Single Ply Generic, TPO, PVC, KEE, and EPDM
 If you aren't sure what roofing material you need, please try our Rooftop Capability Tool or give us a call!

Available for the following roofing manufacturers: 
Generic, Carlislie, Verisco, Mule-Hide, WeatherShield, Firestone, GenFlex, Johns Manville, GAF, IB Roof Systems, Sarnfil, Duro-Last, Flex, Fiberite, US-Ply
 



U-Anchor 2000 PVC TPO CPA KEE.png
U-Anchor 2000 w-Ring PVC TPO CPA KEE.png
U-Anchor 2000 EPDM w-Ring.png

Testing

Testing-Photo-3-150x150.jpg

Disclaimer: The attached information represents tension loads or loads applied to the product in an upward direction, perpendicular to the roof surface. Roof assemblies must be secured in accordance with typical roof industry installation practices and attachment patterns specified in the individual test report selected. Third party test reports are available for both tension as well as shear for each roof assembly. Loads are listed in ultimate force without the inclusion of a safety factor. Allowable loads should be calculated using a safety factor consistent with ASCE7 and ASTM D6630. Actual safety factor identification and overall force load calculations are the responsibility of the qualified design professional of record for each project.


Videos